ZTE MF65: The Complete Guide — Mode Switch, Web Exploits, EFS & Feature Unlocks
ZTE MF65: The Complete Guide — Mode Switch, Web Exploits, EFS & Feature Unlocks
Consolidated from the MF65 series published on this blog between June 2016 and January 2025. Ten posts, one box, full toolchain. This is the ancestor series that the [MF910 guide](/2026/11/zte-mf910-mf910b-mf910v-telstra.html) ports forward.The ZTE MF65 (Telstra-branded in AU) is a 3G WiFi puck running a Qualcomm MSM chipset with a GoAhead web server on the front. The web UI trusts its inputs far more than it should, and the diagnostic mode underneath hands over the whole filesystem. Here's everything, in the order you'd actually use it.
1. Mode switch — the foundation
Everything starts with flipping the USB composition. The stock page hides three modes:
| Mode | USB devices exposed |
| factory_mode | Download mode — DIAG + AT + MODEM |
| debug_mode | Debug mode — RNDIS + DIAG + AT + MODEM |
| work_mode | Work mode — RNDIS only |
The original helper page is hosted in [this post](/2016/06/zte-mf65-mode-switch.html) — or hit the endpoint directly:
http://192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY
After switching, check the page title for status and refresh. To return to normal operation, send AT commands to the **ZTE NMEA Device** COM port:
AT+ZCDRUN=9
AT+ZCDRUN=F
2. Remote file include — the unclosed `` bug
The `switchCmd` handler writes the result into the page using an **unclosed `
http://192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=pagename
